Laser Scribing System large
MS Code: Laser Scribing System large
Product Details

The Laser Scribing Machine utilises a carbon dioxide laser, producing a continuous cut, which is used to remove the conductive oxide layer from glass substrates so that a series connect tile can be produced. The software allows the machine to be programmed for your specific tiles and designs.

The wavelength utilised renders the system suitable for plastics and glass. There is a slight etching of the substrate where the TCO is removed. This system needs Laser cartridge and focal lens substitution after about 6 months of intense usage (cheap spare parts are available)

Benefits of the Laser Scribing Machine include: precision scribing, use of your own CAD files, and high speed operation.

Use : Use the Laser Scribing Machine Large to remove the conductive oxide layer from large area glass or polymeric substrates.
Specifications :
FeaturesLaser scriber mediumLaser scriber large
Control Features Computer control system allows user to define scribing design
CO2 Laser Sealed 10.6 microns. Available in; 60 Watts Sealed 10.6 microns. Available in; RECI S2 80W
Repitition Rate Repetition rate is dependent on the pattern that is being printed and the speed of the laser which is up to 100cm/sec
Safety Features Provided with Protective goggles
Machine Requirements - Electricity: 110/220VAC ±10%, 50/60Hz
- Exhaust system
Dimensions L 1137 mm x W 1602 mm x H 1060 mm L 1547 mm x W 1872 mm x H 1060 mm
Working area 100 cm x 60 cm 130 cm x 90 cm
Z axes control Available on request Available on request
Lens Options Spot size is dependent on the lenses that are chosen when the laser is purchased. 2 Options available, the standard option is in bold: Focal length Spot Size Resolution 63.5mm 0.18mm
Cooling Type Water Cooling
reflector mirrors 3 pcs
Focal lens 1 pc 1 pc
Engraving Speed 0-60000mm/min
Cutting Speed 0-40000mm/min
Laser Output Control (0-100% Set by Software )
Min. Engraving Size Chinese: 2.0mm*2.0mm, English Letter: 1.0mm*1.0mm
Highest Scanning Precision 4000DPI
Locating Precision ≤+0.01mm
Controlling Software DSP Control System
Graphic Format Supported DST PLT BMP DXF DWG AI LAS,etc
Color Separation Yes
Drive System High-precision 3-phase Stepper Motor
Auxiliary Equipments Exhaust Fan and Air Exhaust Pipe
Power Supply AC110V/220V+10%,50HZ/60HZ
Working Environment Temperature:0-45°C,Humidity 5-95%(No Condensate Water)
Optional Spare Parts Honeycomb Worktable, Rotary Device,Auto-focus Device